Supply Empire IMD / IML adhesive ink IMBHF009, Japan ink IMBHF009 BINDER adhesive TEIKOKU Empire is empire IMD / IML supporting the use of ink, forming during rolling, so forming resin and film have been printed pattern pieces for gluing adhesive for screen printing. The raw materials containing no halogen (chlorine Cl, bromine Br) compounds, not benzene, toluene, xylene, isophorone and other environmental load of substances. Even in the printed substrates in the MIR9000 PC ink series does not affect the MIR mirror mirror mirror of ink. 

 Use 
 * In the PC sheet, PET film and other easily Bonding 2 liquid hardening ink printing pattern forming surface and rolling the adhesive resin layer between the printing purposes. 
 * Adapted to PC, PC / ABS, PMMA and other injection molding resins. 

 Features 
 * Do not use raw materials containing halogen (chlorine Cl, bromine Br) compounds. 
 * Does not contain benzene, toluene, xylene, cyclohexane, isophorone, etc., on the human body, the environment safer. 
 * Due to screen printing, so you may need part of the graphics printing. 
 * Is a liquid evaporative drying ink, easy to operate. 

 Note 
 * The halogen-containing compounds may be mixed, it is not specified using the specified solvents and solvent than the curing agent and curing agent. 
 * Blade coating, emulsion, equipment, etc. may also be printed with halogen compounds, so make sure before use. 

 Dilution / washing 
 * Before use, please be mixed adhesive fully. 
 * Can be printed without dilution. For the purpose of dilution, but may choose to use the following solvents: 
 * F003 solvents (slow dry) dilution in the 5% adjustment. 
 * Please do not use other solvents, as would adhesion, and other printed material adverse impact on each stick. 
 * Excessive dilution will reduce the printing flexibility and adhesion, should be avoided. 
 * Print screen, etc. For washing, use detergent screen produced by the company (N). 

 Print 
 * Please use the T200 ~ T250 for the purpose of screen printing. 

 Drying / curing 
 * 80 ℃ for 5 minutes when dry, but the coating will reduce the residual solvent and forming the resin adhesion. The same pattern of printing ink and the lower the need for heating and drying / curing. 
 * Please refer to the lower drying pattern of the final printing ink drying / curing conditions.