Supply Empire ISX Series IMD / IML silk screen printing ink, ISX ink forming the past compared with the ink, is an excellent stretch of rolling forming a liquid solvent-based inks. 
 On the PC and the PC sheet forming resin has good adhesion. Without adhesive can also be used injection molding (FIM). Special can be used for air pressure, vacuum forming and other forming process, can display their efficacy. 
 Within the device can make products from cars, appliances and other household goods nameplate to the wide use of one piece goods. 
 Use 

 * On the PC chip, processing PC / PBT films such as printing. 
 * Suitable for injection molding resin: PC, PC / ABS, ABS, PMMA (acrylic) 

 Features 

 * Does not contain benzene, toluene, xylene and isophorone and other environmentally hazardous substances. 
 * Is a single fluid heating and drying type, work is good, with excellent high temperature and pressure in the forming patience. 
 * For the printing sheet during the forming process, the coating has excellent resistance to follow. 
 * And forming a heat resistance and excellent adhesion resin set color. 
 * The screen printing is the only essential part of the graphics processing. 

 Dilution / washing 

 * Ink before using to mix fully. 
 * ISX ink diluted solvents Z705 (Standard). According to the printing conditions, 515% in the dilution range. Standard dilution of 10%. 
 F001 (Fast-drying), F003 (standard type), Z705 (slow dry) 
 * If excessive dilution will reduce the printing adaptability, flexibility and adhesion formation, may cause light leakage and pinhole film phenomenon, please avoid. 
 * As well as inter-viscosity adhesive will be affected, please do not use other solvents. 
 * Print screen, etc. For washing, use of the company's screen cleaning agent (N). 

 Additives 
 * SM40 Defoamer: To improve the defoaming and leveling results, the use of 13%. 

 Print 

 * Suitable for T-200 ~ 270 mesh screen printing. 
 * Use T-250 mesh screen printing, each kg of printing ink coverage of approximately 35 square meters. 

 Drying / curing 

 * Drying time to touch at room temperature (25 ℃) under about 10 minutes, but it must be heated drying. 
 * Initial drying for the box-type drying furnace, 80 ℃, 3 minutes. Standard drying time of the final 90 ℃, 90 minutes. 
 * Based on the printing area, screen mesh, the film thickness, the printing environment (temperature, humidity, etc.), drying machine performance and other factors, on the drying, curing, forming adaptability will have some impact. Printing in the overlap, if the lower over the ink dried, the coating will cause light and, therefore, before the formal printing and must be tested to confirm, the setting dry conditions.