Supply Empire IMD / IML ink IPX series, the Japanese Imperial IPX TEIKOKU ink is not contained benzene, toluene, xylene and isophorone and other environmentally hazardous substances in the environment corresponding to the IMD low odor ink. On PET and PC films with good adhesion. After forming such as in the rolling process, have excellent heat resistance, and molding resins with good adhesion. Is suitable for fine printing plate rolling and other forming two liquid reaction type of screen printing inks. 
 Use 
 * Easy Bonding PET film and PC film forming pattern printed calendar. 
 * Use acrylic, AS, ABS, PC / ABS resin, the rolling shape. 
 Features 
 * As the two liquid reaction type ink, excellent heat resistance can be formed film. 
 * Relief print film has excellent workability. 
 * Heating conditions at 90 ℃ after curing can get rolling forming patience. 
 * Available in weather resistance, heat resistance and excellent color series 
 Dilution / mixture of curing agent / detergent 
 * Ink before using to mix fully. 
 Dilution of the F-003 * 10 ~ 15% of the solvent as the standard, according to printing conditions, the following solvents may be used. 
 F001 (Fast-drying), F003 (standard type), Z705 (slow dry) 
 * Excessive dilution or use of other solvents will reduce the printing flexibility and adhesion, are requested to be avoided. 
 * According to different purposes, 100 of the ink, please add the following after adding the amount of mixing. 
 240 curing agent (standard) 220 106 curing agent curing agent 200 curing agent 
 IPX 10% 15% 16% 14% 
 * Allow time for the room temperature at 25 ℃ in about 4 to 5 hours. 
 * Over the time the ink can degrade performance, do not re-use. 
 * Print screen, etc. For washing, use of the production company (Screen detergent N). 
 * Auxiliaries SM40 Defoamer: improving defoaming and leveling effect, in the 1 ~ 3% to use. 
 Print 
 * Suitable for T-200 ~ 270 mesh screen printing. 
 * Use T-250 mesh screen printing, each kg of printing ink coverage of approximately 35 square meters. 
 Drying / curing 
 * Must be heated to dry. Standard oven dry condition at 80 ℃ 10 minutes for drying to touch, and then printed on the adhesive after the IMB, 90 ℃ for 60 minutes in the final dry. 
 * Due to the printing area, screen mesh, printing environment (temperature, humidity, etc.), the different performance of the dryer, dry there will be changes in the pre-production test must be carried out for confirmation.