Germany Baolong IMD IML ink supply N2K series, NORIPHAN N2K is a two-component solvent-based printing for the back of the IMD / FIM technology, printing inks, can be used in PC material, 
 NORIPHAN N2K printed in the back of the IMD / FIM technology performance: 
 Molding, thermoforming or pressure forming 
 Injection molding process, and resistance to red ink when the temperature 
 And injection molding resins such as PC, PC / ABS and silicone resin, good adhesive properties of the permanent 
 This especially applies to printing ink sheet material (such as: 50μm of the sheet), sheet curling phenomenon can be avoided, but also for IMD / FIM technology 
 Metal coating for printed film and the chemical etching process for 

 Appearance: 
 High light, the gloss of the material by printing. 

 Color: 
 NORIPHAN N2K paint does not contain toxic heavy metals (according to DIN EN 71, part 3). 
 NORIPHAN N2K pigments based on high brightness, almost all colors can be obtained through the deployment of the basic colors. 

 Mesh: 
 Recommended to use 7748 threads / cm - 15031 threads / cm (19548 threads / inch -38031 threads / inch) polyester mesh. Stainless steel mesh can be applied to special requirements. 

 Online version: 
 Must use a solvent-type sensitive adhesive. Recommended Baolong Norikop 8 HR-type sensitive adhesive, get excellent print results. 

 Additives: 
 Hardener hardener NORIPHAN N2K 005 requested in prepress join Stir into the ink, adding amount: 2 3% 
 And hardener and mix thoroughly NORIPHAN N2K NORIPHAN N2K 005 lifetime activation of a mixture of 812 hours, depending on temperature and humidity conditions. 

 Thinner: 
 Thinner NORIPHAN N2K 090 (fast drying) 
 Slow drying agent NORIPHAN N2K 097 (drying medium) 
 NORIPHAN N2K 097/003 (slow drying) 
 NORIPHAN N2K 097/006 (slow drying) 
 Slow Dry Extract NORIPHAN N2K 097/002 (medium drying speed) 
 NORIPHAN N2K 097/007 (drying speed is very slow) 
 Between additives as needed, any proportion mixed with each other. General proposes to add the appropriate thinner 15 - 20%. 

 To print precise patterns, NORIPHAN N2K 097/003 or NORIPHAN N2K 097/006 slow drying agent can be used alone or with slow dry paste NORIPHAN N2