INQ series of ink supply of the Empire, the Imperial (TEIKOKU) INQ series of ink is not contained benzene, toluene, xylene and isophorone and other environmentally hazardous substances in the environment corresponding to the IMD low odor ink. Again superior solubility, such subtle for printing plate. After processing the film has excellent flexibility and heat resistance, is rolling forming two liquid reaction type of screen printing inks. 
 Use 
 * Easy Bonding PET film and PC film forming pattern printed calendar. 
 * Use acrylic, AS, ABS, PC / ABS resin, the rolling shape. 
 * For different printing materials, a printer in the printing material must be conducted prior to the heating equipment, please confirm before use. 
 Features 
 * As the two liquid reaction type ink, excellent heat resistance can be formed film. 
 * Printed surface of the half-light. 
 * Has a low odor, and good working environment. 
 * Available in weather resistance, heat resistance and excellent color series 
 Dilution / mixture of curing agent / detergent 
 * Ink before using to mix fully. 
 Dilution of the F-003 * 10 ~ 15% of the solvent as the standard, according to printing conditions, the following solvents may be used. 
 F-001 (quick-drying type), F-003 (standard type), Z-705 (slow dry) 
 * Excessive dilution or use of other solvents will reduce the printing flexibility and adhesion, are requested to be avoided. 
 * According to different purposes, 100 of the ink, please add the following after adding the amount of mixing. 
 220 curing agent (standard) 240 106 curing agent curing agent 200 curing agent 
 INQ 5% 3% 6% 4% 
 * Allow time for the room temperature at 25 ℃ in about 4 to 5 hours. 
 * Over the time the ink can degrade performance, do not re-use. 
 * Print screen, etc. For washing, use detergent screen produced by the company (N)). 
 * Auxiliary agent SM-40 Defoamer: improving defoaming and leveling effect, in the 1 ~ 3% to use. 
 Print 
 * Suitable for T-200 ~ 270 mesh screen printing. 
 * Use T-250 mesh screen printing, each kg of printing ink coverage of approximately 35 square meters. 
 Drying / curing 
 * Must be heated to dry. Standard oven dry condition at 80 ℃ 10 minutes for drying to touch, and then printed on the adhesive after the IMB, 90 ℃ for 60 minutes in the final dry. 
 * Due to the printing area, screen mesh, printing environment (temperature, humidity, etc.), the different performance of the dryer, dry there will be changes in the pre-production test must be carried out for confirmation.