Germany Baolong NoriPress SMK is a solvent-based screen printing adhesive, is a milky, viscous fluid, through a variety of laminating plastic film technology can improve the adhesion, in the IMD / FIM resin used to bond a variety of injection molding. The thickness of dried NoriPress SMK at least 10μm to get a good bond strength. Therefore, the polyester mesh is best 32-70T/cm (83-178T / head). More detailed multi-layer screen printing may be required. must use the solvent-based emulsion. Recommended Baolong's emulsion: Norikop8HR. NoriPress SMK dried by solvent in the dryer. Evaporative forms of dry agent. The chemical drying printing film drying rack in the curing process is also still carried out; to avoid NoriPress SMK penetrated into the front of solvent ink layer or substrate, it is recommended to use the tunnel dryer (drying temperature 80 ° C/175 ° F). The not drying rack drying. Conducting further pre-press, should be the final drying to remove (the substrate, ink, NoriPress SMK's) residual solvent.