FUNCOAT mirror ink in a transparent plastic material through the back of the printing, so as to achieve a mirror effect of evaporation drying type ink. 
 This set of polycarbonate (PC) PC material used silver. YK silver ink. Previously in polycarbonate (PC) mirror materials for print, the lower the opacity of the mirror. The use of PC silver. YK silver mirror effect and excellent printability, and high viscosity due to the advantages of slow drying, the printing operation efficiency is greatly improved. Easy attachment for PET film, polycarbonate (PC), transparent plastic material such as plexiglass mirror on the printing (recommended for printing on the back of the industrial parts on the printing). 

 PC slow dry silver ten mirror ink, characterized by slow drying, high viscosity, strong mirror of, PC timber, plexiglass timber 

 Screen Printing: 
 Standard aims to use 270 to 300 mesh brush version. 
 Slow dry objective using 270 ~ 350 mesh brush version. 
 Dilution solvent 
 Usually can be used directly after mixing. But want to reduce the ink viscosity, please add any of the standard quick-drying solvent styrene. 
 In addition to the slow-drying solvents, please add any MM. 

 Dry conditions 
 PC, PVC, PMMA material: 10 minutes after cold air drying machine, drying at room temperature 
 Easily attached to the PET material: 80 ℃ 15 minutes or 60 ℃ 20 minutes of forced drying. 
 ※ room temperature (about 30 minutes) can also be under the dry, but better than poor heating and drying of the mirror effect. 

 Tack 
 Easily attached to the PET material (188μm), brush version of T270, at room temperature (20 ℃) 
 Standard 13 points 
 30 minutes slow dry 

 Version of the cleaning solvent cleaning using Vinyl.