Mirror Ink M1 is solvent ink, printing can produce a mirror effect or the SLC effect (similar to that of chrome effect), can be printed on transparent film or pretreatment PET PC chip. 
 Additives: solid adhesion agent stabilizer M1 M1 thinner 6401 Aquapress hardener L49858 
 Cover Printing water-based adhesives: Aquapress ME white transparent or Aquapress M1 
 In the PC film: pre-press, 10% must be added to the ink M1 stabilizer. 
 In the PET film: pre-press, must be added a solid 10% of the adhesion agent to the ink in the M1. For dilution, the use of thinner 6401. After mixing the ink storage time is limited, if the print cover is bad, there may be mixed ink expired. Do not pour the mixture back to the original ink tanks. 
 Screen: maximum diameter of pigment particles 35um, screen choose 77-120T/cm (195-305T / inch). 
 Cleaning: Thinner 6401 
 Blade: hardness 65-75 degrees 
 Drying: slow drying can improve the mirror effect. 
 Hot air drying: 50 ° C, transfer speed 5 m / min. 
 Dry: 2-3 hours at room temperature. (Subject to pre-test) 
 Note: The light and the surface of the substrate depends on the quality, mirror effect of acid and alkali solvents, steam and oxidation of sensitive material. To reduce the impact of these factors must be added stabilizers. However, adding more than a certain amount of stabilizer, it will affect the mirror effect. Adding the amount to be based on actual tests to take into account the production steps and durability tests (such as weather resistance test). If without protective layer, the metal layer will not endure scratches. To protect the level of the proposed operation or storage enclosures India Aquapress ME or Aquapress M1. 
 Cover Printing water-based adhesives: Cover Printing Aquapress ME or Aquapress M1 available screen: 77T/cm, proposes to add 2% Aquapress hardener L49858. In hot air drying machine, Aquapress ME or Aquapress M1 water drying quickly. Suitable temperature 70-90 ° C. Transmission speed depends on the drying effect, in general, speed of 3-7 m / min, could achieve better results. 
 Mirror ink for IMD: mirror M1 in the IMD 3D ink forming molding a limited degree, forming required to cover printing Aquapress ME or 2 days Aquapess M1 white molding.