Ai Qisen ED 427SS conductive silver paste from the very fine grain and low-temperature curing silver refined from thermoplastic resin, for membrane switch, flexible printed circuits. Because it is low-temperature curing, for PC, PET, PVC, PU and other sheet, ED 427SS conductive silver paste can be used alone, but also with the ED423SS conductive carbon paste used in combination, such as the conductivity is not critical, mixed-use can significantly reduce costs. l Typical use: membrane switch, print contacts, radio frequency interference shielding, heating elements, flexible circuit, electroplating, multi-layer circuit boards. l color: silver adhesives: Thermoplastic Color: Silver viscosity: minimum density: 20.71b/gal (2.48kg / 1) Solid content: 77% silver content: 66% Flash Point: 165 degrees Fahrenheit (74 ℃) use of: the original 6 months (low-temperature, shade) l can be coated area: 626sqft/gal1mil (15.37m2 / L, thickness of 25.4μm) 66.7sqft/kg1mil (6.20m2/kg, thickness 25.4μm) (15 克wet slurry can be coated 0.093m2 area, wet film thickness 25.4μm) l side resistance: (0.1ohms/sq1mil (<0.1 / square resistance, thick 25.4μm) l maximum temperature: Fahrenheit 300 ℃ F (149 ℃) consecutive l Usage: This product meets the requirements of the standard screen printing technology. mixing application, in the slow-stir before use, otherwise it will penetrate into the bubble. l Usage: Curing: 160 ℃ F (71 ℃) for 30 minutes when cured, 93 ℃ , 15 min, 121 ℃, 5 minutes, according to the amount of air flow, can be 5% (by weight) of butyl fibrillary acidic solvent. Cleaning: Use MEK, MIBK acetone or similar solvents. Storage: 0 ℃ -27 ℃ temperature preservation .