Ketu Tai Autotype Capillex capillary film (capillary film) is a direct method pre-sensitized photographic film, it is the exposure before the adhesion of wire-line, with hydrophilic. It is suitable for direct version of film. Printing effect and durability are good. 
 Capillex the film thickness ranging from 15 to 80μm, to adapt to the different network heads and through the thickness of the ink used. 
 Capillary film features: 
 Different thickness, the freedom to choose to meet the different thickness of photoresist and demand through the amount of ink, with a hydrophilic, water development, good line sharpness, resolution for strong, Tuomo simple. 
 Use of capillary film 
 Sensitive adhesive suitable for use yellow safety light, as in the manual or when used in daylight, the time not too long after use, the remaining set back to the plastic film cylinder storage. Film not bend, so as not to affect the purpose of its net adhesion. To avoid touching the capillary film layer, should the use of cotton or wool gloves, wet the film surface should be avoided. 
 Method film 
 Small Screen: The film placed on a platform, and then placed in the top of the screen will be dry, so that membrane surface close to the screen with the film, even playing in the water with a watering can to the whole wet until the screen, and then excess water from the wire-line scraped off with a scraper. Edge of the box after water Shidiao dry. 
 Big Screen: The outer layer membrane facing the paper, the water attached to wire-line uniform layer of water, the film carefully affixed to the wire-line film and film base surface with a scraper evenness, and then scrape off the film membrane surface excess water. 
 Drying: 35 ℃ -40 ℃ below, note that to completely dry thoroughly. 
 Exposed film: The screen after drying, remove the film screen film base should be very easy, no sound.