Germany Baolong ink (Proell ink) IMD ink: 
 NORIPHAN ? HTR is a solvent-based one-component screen printing ink, with high temperature thermoplastic resin with high light and good friction resistance. With NORIPHAN ? HTR inks can be printed thermoplastic film forming materials can be used for PC. 
 NORIPHAN ? HTR most technical features for the IMD: 
 - Formability 
 - Resist the injection procedure 
 - And above the recommended injection molding resins and good coexistence PC 
 * Appearance: high light, the gloss of printed materials by 
 * Color: NORIPHAN ? HTR basic transparent by the high brightness pigment composition, almost all colors can be obtained through the deployment of the basic colors. 
 * Additives: 
 Thinner: NORIPHAN ? HTR 090 (fast) 
 Slow drying agent: NORIPHAN ? HTR 097 (middle) 
 Slow drying agent: NORIPHAN ? HTR 097/003 (very slow) 
 All solvents can be mixed in different ratios to achieve the desired drying rate, NORIPHAN ? HTR 097 most widely used. 
 Printing of fine lines, the slow drying agent NORIPHAN ? HTR 097/003, can help extend the open net time. 
 * Drying: Drying is the physical system, by solvent evaporation in the drying tunnel for fast drying. 
 Oven to dry thoroughly after printing to 75-90 ° C ,1-5 hours. 
 * Adhesion: sheet / ink / adhesive resin and different because of many different factors (such as product, process and product design), therefore, each product must be tested separately. 
 * Conditions of Use: 
 If so just chilled out, or because the ink tanks in transit micro heat or cold, please open cans, and other ink temperature close to room temperature before starting to use.